The SnakeAnchor serves as a lanyard and anchoring device, and can be continuously adjusted (2.7 inch intervals). It can be installed open and used as a friction device with pulley or biner in the desired length. It also can be installed in choking mode and continuously adjusted as well. Because of the tube shaped ring this procedure works much better than with any other tool for this application.
The one-and-only combination system of tube shaped ring, parallel sewn 8 mm polyester double braid rope as well as segment stitching, makes for a strong, versatile and easy-to-use tool in everyday work situations. If you want to secure or block the choked sling, you just need to install a small biner into an open rope segment right in front of the ring. Climbing ropes can be fastened as lower anchor.
•Combination system of tube shaped ring & parallel sewn 8mm double braid polyester rope
&bullSHERRILLtreeerves as lanyard & anchoring device
•Can be used as upper and lower anchor (installed as anchor below or above load)
•Able to be continuously adjusted via segmented stitching (2.7