Thimbles

Light-duty rope thimble (for 10-13mm lines)

Protects rope eye from abrasion. This very popular climbing rope thimble has high sides for stay-fast position within splices. Can be removed (using pliers) post splice if necessary. Inside diameter (12mm) accepts most carabiners.  Light-duty plastic design is not recommended for rigging applications. 

Light-duty rope thimble (for 10-13mm lines)

Protects rope eye from abrasion. This very popular climbing rope thimble has short sides for narrow finished product. Can be removed (using pliers) post splice if necessary. Inside diameter accepts most carabiners. Light duty plastic design is not recommended for rigging applications.

Rope Thimble, teardrop, closed (1/2-inch lines)

This thimble can be easily removed from splice if installed loose, allowing climber to alternatively girth-hitch spliced end or pull through tight crotches.

Thimble

Black

Rope Thimble, round plastic (1/2-inch lines)

Cut on one side for installing over hardware pre-splice.

Rope Thimble, round galv-steel (1/2-inch lines)

Open one side for installing over hardware pre-splice

Thimble 1/2" Low Wall

Plastic Red

Thimble 1/2" Low Wall

Light Blue Plastic