|
|
|
|
Truck Mounted Spray Rigs
Contact our truck mounted spray rig expert Tom Duffy at 800-525-8873 or info@sherrilltree.com
After hours 336-908-0887
Tom can help you decide which truck mounted spray rig is best for you!
| Truck Mounted Spray Rig Features |
1. All welded aircraft grade aluminum bodies
2. Smooth finished corners, no exposed seams or welds
3. Rear mounted high visibilty safety strobes
4. Long life sealed LED lights & flashers
5. High strength 3" tubular steel bumper
6. Custom interior shelving & storage
7. Solid structural decking for maximum load capacity
8. Curbside operators control center for safety & efficiency
|
9. Fuel effecient Isuzu, Ford, IH & GMC chassis
10. Commercial grade locking roll-up doors
11. Epoxy primer coat with aviation grade poly finish paint
Financing Available
Contact Phil McClurkin for details:
800-422-1844 or
philm@libertyfg.com
|
All SherrillTree Commercial Trucks are Custom Fabricated to Your Specifications
"They're Built and Designed to be Spray Trucks, NOT Converted Delivery Trucks"
|
Tree care setup
- 400 / 300 / 100 / 100 gallon setups
- 300' of 1/2" spray hose with electric reel
- 300' of 3/4" spray hose with electric reel
- Engine/diaphragm or PTO pump (60 GPM, 700 PSI)
- All aluminum truck body with three 72" roll up doors
- EPA air gap filters & remote mounted suction strainers
- Vortex jet agitation
- D OT lighting & rear bumper
Lawn/Root care setup
- 400 gallon bulk batch tank
- Two 100 gallon mix spray tanks
- 300' of 3/8" spray hose with electric reel
- 300' of 1/2" spray hose with electric reel
- 5.5 HP Honda engine/diaphragm pump (15 GPM, 350 PSI)
- All aluminum truck body with three 72" roll up doors
- EPA air gap filters & remote mounted suction strainers
- Vortex jet agitation
- D OT lighting & rear bumper
Roll-Off Style Commercial Spray Bodies
- Fully hydraulic loading and unloading.
- Multi-task roll-off style body can be interchanged with dump bodies, chipper boxes and cranes.
- All welded aircraft grade aluminum bodies.
- Commercial grade, locking roll-up doors.
- Custom interior shelving and storage.
- Interior spray system can be customized for lawn, tree or organic applications.
- Multi-tank combinations up to 1,200 gallons.
- Solid structural decking for maximum strength.
- Curbside operator control center for safety and efficiency.
SherrillTree Spray Rig Exclusive Feature
- Rear loading compartment is accessible from passenger and driver side.
- Sizes available to accommodate most spreader brands.
- Pressurized outlet for liquid refill on spreader.
- Hauls up to two pallets of fertilizer and 500 gallons of liquid spray material.
- Lightweight, all aluminum construction.
- Commercial grade, locking roll-up doors.
- Can be fully customized for lawn, tree or organic applications.
- With this set up you'll have no need for trailers!
Spray Guns
Once we determine the right SherrillTree Spray Rig to fit your application
needs, you'll be able to choose from a wide range of spray guns and spray rig
accessories to help maximize the capabilities of your new rig.
Root Feeding Needle
This high pressure, high volume needle is manufactured from
thick wall steel pipe, tapered and welded together, complete with
adjustable stainless steel step plate (which doubles as a splash
plate). A high pressure 3/4 inch pull handle valve is mounted in
the 3/4 inch pipe handle. A 3/4 inch FHT brass adapter is included,
ready to attach to your hose. The tip is a replaceable 6 hole 40 GPM
and above @ 200 PSI tip. Length 40 inches.
Root Needle (6 hole) 15142
Replacement tip (6 hole) 15152
Non-kinking High Pressure Replacement Hose
1/2in. by 300ft @ 600psi 28811
3/4in. by 300ft @ 800psi 28630
Deluxe Root-Feeding Needle
Tired of lugging around some relic from Ivan the Plumber's junk shed? Step
into the 21st century with SherrillTree's newest and sleekest liquid transportation
gun for all tree root application needs. This feeder gun features a heavy-duty,
nickel-plated trigger valve with half-inch FNPT swivel inlet, trigger guard,
and molded rubber hand grip for comfortable, all-day use. The structural and
piping element is made of 1 inch, 100 percent high strength stainless steel
tubing, making it very lightweight yet as tough as nails. Each unit is
delivered with stainless steel, adjustable foot bar and stainless, four-hole
injector nozzle. Overall length 42 inches. Maximum pressure 450 psi. Delivers
15 gpm (with included four-hole tip).
Deluxe Root Needle 31929
Replacement Tip 32188
|
|
|
|
|