Fiberglass Orchard Ladder

What are the problems with standard extension ladders for doing tree work? Well, there’s the fact that the limb you’d like to lean against is rarely parallel to the ground, causing the ladder to teeter from side to side when you try to climb, that is, if there’s a limb at all! Or perhaps it’s how one ladder’s foot always seems to be standing on a root when you want to lean it against the trunk, causing the top to tip in the opposite direction. Other times, the narrowness of the footing simply sinks one side into the ground, with equally frustrating results. And what do you do for pruning small trees that you can’t lean a ladder against at all, much less climb? Our ladder not only solves these problems but weighs considerably less than an extension ladder. The wide stance provides amazing stability on uneven ground while focusing the “lean point” squarely on the tree. For small specimens, the single leg allows maximum access to the heart of the plant for quality work without damage. Certain situations require the climber to approach from a steeper or more gradual incline, easy with the SherrillTree Orchard Ladder, impossible with an extension ladder! We are now offering the 12 ft. ladder in fiberglass. Although heavier, the fiberglass construction is safer around energized lines with its non-conductive rail. ANSI A14.5 rating. Ships direct from factory. Due to the large size of this product we are required to ship by motor carrier. Thanks to its light weight and narrow profile, it is easy for carriers to load or unload. Order more than one, and save on freight costs!